设备
十一大类、三十余个型号——从链板输送机到网前系统，一条线一个组合全覆盖。
备料与输送
Bulk handling & conveying散包机
Screens out stones and metal before the pulper, protecting rotors, plates and pumps downstream.
250–1,100 t/d · 4 models辊道开包机
Built for continuous lines, interlockable with conveying and weighing systems.
Speed 0–15 m/min链板输送机
Plate-chain one-impact conveying for irregular bales — high capacity, low power draw.
40–220 up to 200–500 m³/h碎浆
Pulping转鼓碎浆机
High-consistency drum pulping with integrated coarse screening — preserves fiber length, cuts water, power and chemicals.
70–1,400 t/d · 14–18% cons.D 型水力碎浆机
D-shape shortens circulation paths for faster pulping; rotor chamber sits below the barrel, away from abrasive impurities.
20–680 t/d · 3–5% cons.高浓碎浆机
For M.C./H.C. pulping duties where fiber-to-fiber rubbing releases ink and contaminants efficiently.
损纸碎浆机
Machine-floor broke handling, sized to the machine’s broke load.
杂质与绳索处理
Impurity & rope handling杂质分离机
Continuous heavy-impurity discharge from the pulper system.
圆筒筛
Removes light contaminants (plastics, films) after pulping.
3,000–12,000 L/min绞绳机与切绳机
Continuous wire, rope and plastic removal from the pulper vat.
抓斗
Charges the pulper with whole bales — heavy duty, low maintenance.
振框筛
Coarse screening of reject and heavy impurities.
压力筛选
Pressure screening中浓压力筛
Best-in-class baskets; Korean auto-oiling and Finnish sealing-water systems as standard; double mechanical seals.
30–1,000 t/d · 1–4% cons.内流式压力筛
Low-pulse inflow design for excellent stock uniformity at the paper machine wire.
30–900 t/d · 0.15–1.0%排渣分离机
Recovers good fiber from screen rejects.
净化除渣
Cleaning & degritting高（中）浓除渣器
Wear-resistant ceramic cones, optimized cone angle, quick-open discharge; three-stage banks with staged fiber recovery.
800–12,000 L/min低浓除渣器
Low-consistency desanding, multi-unit banks for higher tonnage.
400–1,500 L/min per unit纤维分级
Fiber fractionation纤维分级筛
Splits long and short fibers by slot precision — where a multi-ply line makes its money.
0.15 / 0.20 mm slots磨浆与疏解
Refining & deflaking双盘磨浆机 DR 系列
Power-targeted automatic plate-gap control holds refining consistency without an operator watching the amps; integrated rotor removal for fast plate changes.
315–1,800 kW · 400–15,000 L/min双盘磨磨片与内部件
Multiple plate tooth patterns matched to furnish; precision-machined internals for stable long-run refining.
20–48 inch plates疏解机
Swing-door design for fast maintenance; single or double deflaking zones.
1,300–5,200 L/min泵送与储存
Pumping & storage推进器
Keeps stock uniform in chests — sized to chest geometry.
纸浆泵
Medium-consistency stock pumping for the whole line.